To remove the icemaker:
1. Remove the Ice bucket. (See
2. Remove the Phillips-head screw that attaches
the front of the wire harness cover.
Wire Harness Cover
3. Using a small, fl at blade screwdriver, pry the
front of the cover out. Pull the cover towards the
front of the refrigerator.
4. Note the routing of the icemaker wire harness
.)
Ice Bucket
5. Push in the release tab on the front of the
Note: When installing icemaker, engage key slots in
key tabs before pushing icemaker in place.
– 51 –
and then disconnect the harness.
icemaker. Pull the icemaker out of the ice room.
Icemaker
Key Tab
Key Slot
Disconnect
Release Tab
Key Tab
Key Slot