Auto Restart Function - Toshiba RAS-M10GDCV-E Owner's Manual

AUTO RESTART FUNCTION

This unit is equipped with an Automatic restarting function which allows the unit to restart and resume the set
operating conditions in the event of a supply power shutdown without the use of the remote controller.
The operation will resume without warning three minutes after the power is restored.
INFORMATION
The AUTO RESTART FUNCTION is not set to work on shipment from the factory, and so it is necessary
to set it to function as required.
HOW TO SET THE AUTO RESTART
To set the auto restart function, proceed as follows:
OPERATION
Slide the slide switch to AUTO RESTART ON side.
TEMPORARY
COOL AUTO
• The Auto Restart function will not accept an instruction if timer operation with the remote controller is
selected. (Please refer to the section of setting the timer operation.)
HOW TO CANCEL THE AUTO RESTART
To cancel the AUTO RESTART function, proceed as follows:
The system will now be required to manually restart with the remote controller after the main supply is returned.
OPERATION
Slide the slide switch to AUTO RESTART OFF side.
TEMPORARY
COOL AUTO
AUTO RESTART
OFF ON
AUTO RESTART
OFF ON
TEMPORARY
COOL AUTO
VOLTAGE1
220V/230V
VOLTAGE2
When you set to "ON" position of Auto restart, Pi Pi
Pi sound (3 times) are appear.
(During power supply to the unit)
When power supplying return, system will be
restart automatically.
When you set to "OFF" position of Auto restart, Pi
Pi Pi sound (3 times) are appear.
(During power supply to the unit)
When power supplying return, system will not be
restart automatically.
14
AUTO RESTART
OFF ON
240V
REMOCON
220V 230V A
MOTION
MOTION
B