1. Manuals
  2. Brands
  3. Cross Technologies Manuals
  4. Media Converter
  5. 3115-21-109
  6. Instruction manual

Cross Technologies 3115-21-109 Instruction Manual

Block upconverter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual
REMOTE
ALARM
POWER
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment. Printed in USA.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
B2 11.70-12.80 GHZ
MENU
G=10.0
REF=AUTO-E
EXECUTE
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Model 3115-21-109#
Block Upconverter
MODEL 3115
BLOCK UPCONVERTER
January 2019, Rev. 0
C
T
ROSS
ECHNOLOGIES INC.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3115-21-109 and is the answer not in the manual?

Questions and answers

Related Manuals for Cross Technologies 3115-21-109

Summary of Contents for Cross Technologies 3115-21-109

  • Page 1 POWER Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. Printed in USA. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.

  • Page 2: Table Of Contents

    All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies. Cross Technologies, Inc. shall not be liable for any special, indirect, or consequential damages.

  • Page 3: General

    1.0 General 1.1 Equipment Description The 3115-21-109# Block Upconverter converts 0.95-1.85 to 10.90-11.80 GHz or 0.95-2.05 to 11.70-12.80 GHz. The gain range is 0 to +20 dB, adjustable in 0.5±0.5 dB steps. Front panel LEDs indicate Remote operation, PLL Alarm and DC Power. Band select, gain and internal/external/Auto reference frequency selection are controlled by front panel switches or remotely via RS 232C or RS485/422 (Ethernet Optional) and are viewable on the LCD Display.

  • Page 4: Technical Characteristics

    1.2 Technical Characteristics TABLE 1.0 3115-21-109# Block Upconverter Specifications* Input Characteristics (RF) Impedance / Return Loss 50Ω / 14 dB Frequency Band 1; 2 0.95 to 1.85; 0.95 to 2.05 GHz; Noise Figure, Maximum 20 dB Maximum Gain Input Level Range...
  • Page 5 50Ω SMA (RF), 75Ω BNC (L-Band) SF - 50Ω SMA (RF), 75Ω F-type (L-BAND) SN - 50Ω SMA (RF), 50Ω N-Type (L-Band) SS - 50Ω SMA (RF), 50Ω SMA (L-Band) Available Connector Options, See Table 2.2, PG 10 3115-21-109# Manual, Rev. 0 Page 5 01/30/19...

  • Page 6: Monitor & Control Interface

    A) Remote Serial Interface Protocol: RS-232C, 9600 baud rate, no parity, 8 data bits, 1 start bit, and 1 stop bit. (RS-232C, RS-422, or RS-485 - option Q) M&C Cable Diagram - Cross Technologies Frequency Converters and Frequency Sources Female DB-9...
  • Page 7 B) Status Requests - Table 1.1 lists the status requests for the 3115-21-109# and briefly describes them. * PLEASE NOTE: The two character {aa}(00-31) prefix, in the table below, should be used ONLY when RS-485, (OPTION-Q), is selected. TABLE 1.1 3115-21-109# Sta a tus TABLE 1.1 3115-21-109# Status Requests...
  • Page 8 C) Commands Table 1.2 lists the commands for the 3115-21-109# and briefly describes them. After a command is sent the 3115 sends a return “>” indicating the command has been received and executed. General Command Format - The general command format is {CND...}, where:...

  • Page 9: Installation

    The 3115 is powered by a 100-240 ± 10% VAC power supply, and housed in a 1 3/4” X 19” X 14” rack mount chassis. The 3115-21-109# can be secured to a rack using the 4 holes on the front panel. Figure 2.0 shows how the 3115-21-109# is assembled.
  • Page 10 100-240 VAC, 47-63 Hz. (Option -W8). 3 ± 3 dBm, 50 ohms, See Table 2.1. BNC (female) connector. FIGURE 2.1 3115-21-109# Rear Panel I/Oʼs TABLE 2.1 J1 1 0 TABLE 2.1 J10 Pinouts* Function TABLE 2.2 Connector Connector Option n s...

  • Page 11: Operation

    FIGURE 2.2 3115-21-109# Front Panel Controls and Indicators 2.4 Installation / Operation 2.4.1 Installing and Operating the 3115-21-109# 1. Connect a -40 dBm to -20 dBm signal to RF IN, J1 (Figure 2.1). 2. Connect the RF OUT, J101, to the external equipment.

  • Page 12: Menu Settings

    If programming is initiated and no operator action takes place for approximately 30 seconds (before the final press of the Menu/Execute switch) the display will revert to its previous status and you will need to start over. 3115-21-109# Manual, Rev. 0 Page 12 01/30/19...
  • Page 13 During gain changes, the vertical movement will raise or lower the number in the direction of the arrows. b. For other functions such Remote on/off, the vertical switch will alternately turn the function on or off regardless of the direction operated. 3115-21-109# Manual, Rev. 0 Page 13 01/30/19...
  • Page 14 OR you can scroll to “R”, push the Menu/Execute switch to get to: SAVE SETTINGS? Selecting Y will save the new settings. Selecting N will revert to the previous settings. Figure 2.4 (page 15) gives the menu items and how to make changes. 3115-21-109# Manual, Rev. 0 Page 14 01/30/19...
  • Page 15 Internal 10 MHz Reference. REF = AUTO -I appears on the front panel display where -I indicates that the unit is using the Internal 10 MHz Reference. The Internal 10 MHz Reference is present on the reference output connector, J8. 3115-21-109# Manual, Rev. 0 Page 15 01/30/19...
  • Page 16 PUSH BUTTON SCROLL <> RS485 ADDRESS = 0 Menu 8 Set RS485 Address SCROLL PUSH BUTTON Save? When go to end SCROLL <> SAVE SETTINGS? SCROLL PUSH BUTTON FIGURE 2.4 Menu Display and Sequences 3115-21-109# Manual, Rev. 0 Page 16 01/30/19...

  • Page 17: Environmental Use Information

    G. Top Cover - There are no serviceable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE REINSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 3115-21-109# Manual, Rev. 0 Page 17 01/30/19...

  • Page 18: Shiloh Road Alpharetta, Georgia

    ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com Printed in USA 3115-21-109# Manual, Rev. 0 Page 18 01/30/19...

This manual is also suitable for:

31153115-41-128

Table of Contents