Mounting; Mounting The Collector And The Manifold - Dimplex SVT 200KV Installation And Operating Instructions Manual

5
5

Mounting

ATTENTION!
Mounting and initial start-up must only be performed by qualified
personnel! Improper installation will void any warranty claims! Please
use only suitable tools!

5.1 Mounting the collector and the manifold

The individual parts on the brine manifold and the brine collector
must be connected according to Fig. 5.1 on page 4. Correct in-
stallation of the seals is especially important when mounting the
Fig. 5.1: Mounting several brine manifolds
NOTE
Depending on the required abstraction capacity, the individual parts must
be connected according to the images shown below.
Mounting for systems with a maximum of 8 circuits (with connection package AP SVT)
Fig. 5.2: Mounting of a brine manifold with a maximum of 8 circuits
GB-4
ATTENTION!
During installation, the user must also comply with the (connection)
requirements of the local utility companies and follow the installation and
operating instructions in addition to the valid national regulations.
ball valves on the brine manifold and when assembling several
brine manifolds.