Table of Contents
Advertisement
Step 5. Modify the IP address of the WAN interface. Click "Network->Interface->WAN" to modify
the IP address of WAN in the following page.
Note:
1. WAN and LAN can't be at the same network segment. Please set WAN to DHCP client
or different network segment with WAN. The LAN of new version of server will be set to
DHCP by default.
2. If you set fixed IP to WAN interface, please remember it, otherwise you may not access
the server.
S1 Server Manual
Last updated: 11/26/2013
Page 6 of 10
Page 6 / 10
Advertisement
Table of Contents
