Table of Contents
Advertisement
S1 Server Manual
Last updated: 11/26/2013
Page 5 of 10
Step 2. Connect server and your PC via network cable.
Step 3. Enter server's IP address into your web browser, then login server management
interface, both of username and password is 'root' by default.
Step 4. Set LAN as DHCP client. Click "Network->Interface->LAN", select DHCP client as
the following page, and then click "Switch Protocol", and then click "Save & Apply".
The default
LAN value of the first several batch is fixed to 192.168.1.1, and WAN address can't be
set as 192.168.1.x, otherwise the server can't be accessed.
If your server's LAN is set as
DHCP by default, please ignore this step.
Page 5 / 10
Advertisement
Table of Contents
