Cable fixing
Note
●
3 clampers are supplied with this unit. Fix the cables
at 3 locations using the holes for clampers as shown
below.
●
Before turning the power on, stop the holes (3
locations) with the clampers.
Otherwise, foreign objects may enter the holes,
resulting in a fire.
If you need more clampers, purchase them from
•
your dealer. (Available from the customer service)
86-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
16
English
1. Attach the clamper
To remove from
the unit:
2. Bundle the cables
hooks
To loosen:
knob
hole
Insert the clamper in a
hole.
snaps
Keep pushing both side
snaps and pull out the
clamper.
Set the tip in the hooks
and tighten.
Keep pushing the knob
and pull out the tip.