Table of Contents
Advertisement
Operating Instructions
BNT-40X • BNT-25X •BNT-58X
Automatic Rebar Tying Machines
These tools have
Passed ISO9001 International
Quality System Certification
The charger has passed ETL Certification
BNT-25X
BNT-58X
BNT-40X
Please read this manual carefully before using this machine to make
sure you are familiar with all safety and warning instructions.
Page | 1
Advertisement
Table of Contents
Related Manuals for BN Products BNT-40X
Summary of Contents for BN Products BNT-40X
-
Page 1: Operating Instructions
Operating Instructions BNT-40X • BNT-25X •BNT-58X Automatic Rebar Tying Machines These tools have Passed ISO9001 International Quality System Certification The charger has passed ETL Certification BNT-25X BNT-58X BNT-40X Please read this manual carefully before using this machine to make sure you are familiar with all safety and warning instructions. -
Page 2: Machine Call-Outs
OPERATION INSTRUCTION Please read this manual carefully before using this machine to make sure you are familiar with all safety and warning instructions. Machine Call-Outs Page | 2... -
Page 3: Safety Locks
This may result in distortion of the coil and may cause Tool Specs injury to you. Product No. BNT-25x BNT-40x BNT-58x • Do not operate this tool in the rain or areas where moisture is present. This may result in electrical Weight Information shock or accident. -
Page 4: Battery And Charger Usage
Only use recommended wire spools. Using non-standard Ties Per Charge 4000-5000 ties per charge wire or spool could cause the tool to malfunction. Additional Charger (BNTLI-18C) Holster (BNH-40) Extension Arm (BNEX-40) Electronic Extension Arm (***) Humidity 80% RH or less •... -
Page 5: Care And Maintenance
The Tying Procedure • Remove the hex screws of the release lever from the plate and take out the release lever in the direction of the arrow as shown above. Unlock the trigger lock. Keep the mechanical arm on the •... - Page 6 Product Specifications and Technical Parameters BNT-25X 1/8” 1/4” 3/8” 1/2” 5/8” mesh 10mm 13mm 16mm mesh 1/8” 1/4” 3/8” 10mm 1/2” 13mm 5/8” 16mm BNT-40X 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4” 10mm 13mm 16mm 20mm 22mm 25mm 29mm 32mm 1/8”...
-
Page 7: Common Faults
Common Faults This tool alerts you to the following fault conditions by means of a warning sound and warning light. If the problem is not solved please contact our maintenance support department: (800) 992-3833. Warning Indicator Common Faults Items To Inspect Possible Cause Actions Sound... - Page 8 Page | 8...
- Page 9 PARTS LIST BNT-40X PARTS LIST BNT-40X Part Description Qty. Part Description Qty. Arm A Route PWB Unit 1 1g Connecting Plate 1 Magnetic Plate Fixed Cutter Twister Assy 191.6g Torsion Spring 1 Twisting Motor Assy Cutter 326.8g Cutter Lever A...
- Page 10 PARTS LIST BNT-40X PARTS LIST BNT-40X Part Description Qty. Part Description Qty. Reel Stay Main Switch Base Assy 1 26.8g Strength Plate Frame R Assy Nut M3 Frame L Assy Adjusting PWB Unit 1 3.8g Feeding-Response PWB unit Adjusting Spring...
- Page 11 This machine was developed as an economical and practical tying machine with many international patents. BN Products-USA 3450 Sabin Brown Road Wickenburg, AZ 85390 (800) 992-3833 • mail@bnproducts.com...
- Page 12 Page | 12...
Need help?
Do you have a question about the BNT-40X and is the answer not in the manual?
Questions and answers