BN Products DBR-25WH Handling Instructions Manual

BN Products-
USA, LLC.
3450 Sabin Brown Road • Wickenburg, AZ 85390
(800) 992-3833 • (928) 684-2813 • mail@bnproducts.com
DBR – 25WH
REBAR STRAIGHTENER
HANDLING INSTRUCTIONS
READ THESE INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING TO USE REBAR STRAIGHTENER
Not following proper operating procedures can lead to accidents.
If in doubt of any procedure, contact your local authorized agent.
The DBR-25WH is a portable heavy-duty electric/hydraulic rebar bender
and straightener. It helps save valuable man-hours by cleanly and effi-
ciently bending or straightening bent rebar. It functions as a simple 90-de-
gree portable electric rebar bender. The interchangeable bending hook
covers rebar diameters from #4 to #8 grade 60. Maximum pressure for
bending and straightening ranges from 8.5 to 11 tons. It's portable and
versatile enough to bend or straighten rebar in-place with its push/pull hy-
draulic capabilities. It will bend a 90-degree angle in only (4) seconds.
The bending head also rotates 360 degrees. Ships complete in a plastic
carrying case with hydraulic oil, a tool kit and two additional bending dies.
This tool solves bending applications other tools can't even attempt.
Page 1
DBR-25WH_Product_Manual-2018