Panasonic F-PXL45A Operating Instructions Manual page 17

FURTHER INFORMATION
Sleep mode auto operation refers to detects the indoor brightness by the light sensor, and
automatically adjusts the brightness of indicators and the air volume .
When sleeping, the room becomes dark, the indicators light half on or light off and the air volume
becomes low.
The room becomes dark
Display panel
Light indicator, nanoe
TM
and ECONAVI indicator light off,
others light half on.
ECONAVI mode refers to the automatic operation by combining the "patrol mode" in which the
product detects the dirt in the air in the room every hour. With the "learning mode" in which the
product can forecast the dirt generation by mastering the generation time of dirt every day.
Automatically stops operating when detects the air is clean, meanwhile operates in advance to
eliminate the dirt effectively before spreading, thus reducing the operation time and saving power.
Patrol mode
The product will stop operating automatically after the air is cleaned.
After the operation is paused for 50 min,the product will operate for 10
min with air volume set to "Med" in the patrol mode. While the opera-
tion is paused and in the patrol mode, if any dirt is detected, the product
will operate with the air volume corresponding to the dirtiness.
Learning mode
The product records the time and dirtiness of air during operation, and takes the preventive opera-
tion within 5 min before the recorded dirt is generated.
(Although the records are updated every day, the previous records will be lost once the power plug is
disconnected.)
About sleep mode auto operation
Air pollution indicator
and PM2.5 pollution
indicator
indicator
Light off
About ECONAVI mode
Notice
When the air volume is set to hi, med or lo,
the air volume can not adjust automatically.
17