Makita 4322 Instruction Manual page 12

1
1. Anti-splintering device
2. Protrusions
2
1. Aluminum base
2. Anti-splintering device
1. Cover plate
2. Aluminum base
12
Anti-splintering device (optional accessory)
002731
For splinter-free cuts, the anti-splintering device can be used. To install the
anti-splintering device, move the base all the way forward and insert it between
the two protrusions of the base.
NOTE:
• The anti-splintering device cannot be used when making bevel cuts.
2
Anti-splintering device for aluminum base
005856
(Optional accessory )
For splinter-free cuts, the anti-splintering device can be used. To install the
anti-splintering device, move the tool base all the way forward and fit it from the
back of tool base. When you use the cover plate, install the anti-splintering
device onto the cover plate.
1
CAUTION:
• The anti-splintering device cannot be used when making bevel cuts.
Cover plate for aluminum base (Optional accessory)
005458
1
Use the cover plate when cutting decorative veneers, plastics, etc. It protects
sensitive or delicate surfaces from damage. Fit it on the back of the tool base.
2