Makita 3706 Instruction Manual page 7

To adjust the cutting depth, proceed first by loosening the
thumb screw and then by sliding the shoe and circular
guide together. After completion of the adjustment,
tighten the thumb screw securely.
2
1
001633
OPERATION
3
2
001634
Loosen the knob, and adjust its position in accordance
with the size of the circle to be cut. (The hole dimensions
to be cut are indicated on the side of the circular guide as
a general guideline.) After completion of the adjustment,
tighten the knob securely.
Insert the end of the knob into the center of the circle to
be cut, and proceed to cut in a clockwise direction.
1
001635
Vacuum cover
Cleaner operations can be performed by connecting the
cutout tool to Makita vacuum cleaner or dust collector.
1. Shoe
2. Circular guide
3. Thumb screw
3
1. Knob
2. Tighten
1
3. Loosen
1. Knob
Installing vacuum cover
2
001636
Loosen the thumb screw and remove the shoe. Attach
the vacuum cover, and fasten it securely using the thumb
screw.
Installing vacuum cover with circular guide
2
3
001637
Release the thumb screw which serves to secure the
vacuum cover. Align the projections in the circular guide
with the grooves in the vacuum cover, and secure the
vacuum cover and circular guide using the thumb screw.
To adjust the cutting depth, proceed first by loosening the
thumb screw and then by sliding the vacuum cover and
circular guide together. After completion of the
adjustment, tighten the thumb screw securely.
1
4
5
2
3
001638
Connecting to Makita vacuum cleaner or dust
collector
001639
7
1. Thumb screw
1
2. Vacuum cover
1. Circular guide
1
2. Projections
3. Vacuum cover
1. Circular guide
2. Thumb screw
3. Vacuum cover
4. Loosen
5. Tighten
1
1. Vacuum cover
2. Hose 28
3. Hose for
2
vacuum cleaner
3