Makita DHR202 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Tools
  5. DHR202
  6. Instruction manual

Makita DHR202 Instruction Manual

Cordless combination hammer
Hide thumbs Also See for DHR202:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Combination Hammer
DHR202
008828
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita DHR202

Summary of Contents for Makita DHR202

  • Page 1 INSTRUCTION MANUAL Cordless Combination Hammer DHR202 008828 IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model DHR202 Concrete 20 mm Capacities Steel 13 mm Wood 26 mm No load speed (min 0 - 1,200 Blows per minute 0 - 4,000 Overall length 358 mm Net weight 3.5 kg Rated voltage D.C. 18 V •...
  • Page 3 EC Declaration of Conformity refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Makita declares that the following Machine(s): Do not expose power tools to rain or wet Designation of Machine: conditions. Water entering a power tool will Cordless Combination Hammer increase the risk of electric shock.
  • Page 4 Power tool use and care Service 17. Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical replacement power tool will do the job better and safer at the parts.
  • Page 5 14. Some material contains chemicals which may Tips for maintaining maximum battery life be toxic. Take caution to prevent dust Charge battery cartridge before inhalation and skin contact. Follow material completely discharged. supplier safety data. Always stop tool operation and charge the battery cartridge when you notice less tool SAVE THESE INSTRUCTIONS.

  • Page 6: Functional Description

    Overloaded: • FUNCTIONAL DESCRIPTION The tool is operated in a manner that causes it to draw an abnormally high current. In this situation, release the trigger switch on CAUTION: the tool and stop the application that caused Always be sure that the tool is switched off and the •...
  • Page 7 Rotation only NOTE: Use a dry cloth to wipe the dirt off the lens of lamp. • 1. Rotation only Be careful not to scratch the lens of lamp, or it may lower the illumination. Do not use thinner or gasoline to clean the lamp. •...
  • Page 8 If the bit cannot be pushed in, remove the bit. Pull the ASSEMBLY chuck cover down a couple of times. Then insert the bit again. Turn the bit and push it in until it engages. After installing, always make sure that the bit is securely CAUTION: held in place by trying to pull it out.
  • Page 9 Do not force the tool. Light pressure gives best results. Depth gauge Keep the tool in position and prevent it from slipping away from the hole. 1. Depth gauge Do not apply more pressure when the hole becomes clogged with chips or particles. Instead, run the tool at an idle, then remove the bit partially from the hole.
  • Page 10 Always secure small workpieces in a vise or similar • hold-down device. 008835 Remount the holder cap covers on the tool. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.

  • Page 11: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Bull point • Cold chisel •...
  • Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885256A220...

Table of Contents