Connecting The Liquid Propane Cylinder - Weber 320 Owner's Manual

CONNECTING THE LIQUID PROPANE CYLINDER

Use LP cylinders with a minimum capacity of 5 kg and a maximum capacity of 13 kg.
The regulator illustrations shown in this manual may not be similar to the one you are
using for your barbecue, due to different country or regional regulations.
m WARNING: Make sure that the LP cylinder or regulator valve
is closed.
A) Connect LP cylinder.
Some regulators push ON to connect, and pull OFF to disconnect, others have a
nut that has a left-hand thread that connects to the cylinder valve. Follow one of the
specific regulator connection instructions illustrated based on your regulator type.
a) Screw regulator fitting onto tank turning clockwise (1). Position the regulator so
that the vent hole (2) faces down.
b) Screw regulator fitting onto tank turning anti-clockwise (3) (4).
c) Make sure regulator lever (5) is in the down/off position. Push regulator down on
tank valve until regulator snaps into position (6).
d) Make sure regulator lever is in the off position. Slide the collar of the regulator
up (7) (9). Push the regulator down onto the tank valve and maintain pressure.
Slide collar closed (8) (10). If regulator does not lock, repeat procedure.
m WARNING: The hose must be secured to the cart leg by
the hose retention clip (11). Failure to do so could cause
damage to hose resulting in a fire or explosion, which
can cause serious bodily injury or death and damage to
property.
m DANGER
Do not store a spare LP cylinder under or near this appliance.
GAS INSTRUcTIONS
3
◆
1
2
3
4
5
6
7
9
11
4
8
10
WWW.WEbER.cOm
® 25