Setting The Date - Independent 0510 Instruction Manual

Setting the date

Date
* The date has 31-day cycle. Reset the correct date at the start of March, May, July,
October and December.
3. Once the date has finished being set, return the crown to the normal position.
20
1. Pull the crown out to position 1 .
2. Turn the crown counterclockwise to set
0 1
Crown
the date.
* The crown turns freely, and the date
does not change if turned clockwise.
* If the date is set while the time on the
watch is between the hours of about
9:00 PM and 1:00 AM, the date may
not change on the following day. If this
happens, set the date after temporarily
moving the hands to a time other than
between the above times.