Setting The Time - Independent 0510 Instruction Manual

Setting the time

Hour hand
Second hand
3. Push the crown back to position
hand starts running again.
Minute hand
0 1 2
Crown
1. Pull the crown out to position
the second hand at the 0 seconds position.
2. Turn the crown to set the minute/hour
hands to the desired time.
* The date changes at 12:00 AM. Pay attention
to AM and PM when setting the time.
by a time signal, and then the second
0
[Tips for Accurate Time Setting]
First of all, with the second hand
stopped at the 0 seconds position,
advance the minute hand 4 to 5
minutes ahead of the correct time.
Secondly, adjust it back to the correct
time. Finally, push in the crown by a
time signal to set the time accurately.
to stop
2
11