Using The Chronograph - Independent 0510 Instruction Manual

Using the chronograph

The chronograph function of this watch is able to measure and display elapsed time up
to 59 minutes 59 seconds in 1 second units. After the chronograph displays 59 minutes
59 seconds, it resumes timing from 0 seconds.
The chronograph minute hand and second hand continue to move until the
chronograph is stopped by pressing button (B) even after 59 minutes 59 seconds have
elapsed.
NOTE: The chronograph hands continue timing until they are stopped even after 60
minutes have elapsed. Once timing is finished, promptly press button (B) to
stop the chronograph, and then press button (A) to reset the chronograph
to 0 seconds. If timing is allowed to continue, the battery will continue to
wear down and the capacity of the battery will eventually run out before the
indicated battery life causing the watch to stop running.
[Chronograph Timing]
1. Start timing by pressing button (B).
The chronograph is repeatedly started and stopped by pressing button (B).
2. Pressing button (A) resets the chronograph to 0 seconds.
16