Setting The Time - Independent 0510 Instruction Manual

Setting the time

Hour hand
Second hand
In the case the crown is a screwlock crown, loosen the screw before operating the crown and
securely retighten the screw after operating.
1. Pull the crown out to position
2. Turn the crown to set the time.
* The 24-hour hand moves in conjunction with the hour hand. Pay attention to AM and PM when setting the time.
3. Securely return the crown to the normal position in synchronization with a telephone or
other time service.
* In models that do not have the date function, when the crown is pulled out to position
turned counterclockwise or clockwise, it rotates without having any effect.
Minute hand
0 1 2
when the second hand has reached the 0 seconds position.
2
[Tips for Accurate Time Setting]
First of all, with the second hand
stopped at the 0 seconds position,
advance the minute hand 4 to 5
minutes ahead of the correct time.
Secondly, adjust it back to the correct
time. Finally, push in the crown by a
time signal to set the time accurately.
and is
1
19