Initializing The Memory (Format Media); Restoring The Factory Settings (Factory Reset) - Roland LX708 Owner's Manual

Initializing the Memory (Format Media)

Here's how to erase all of the files that you saved in internal memory
or on a USB flash drive (sold separately).
NOTE
5 When you initialize, all registrations or files that you saved in
internal memory or on a USB flash drive are lost.
5 If you want settings other than the memory settings to be
returned to their factory-set state, execute a Factory Reset
(p. 23).
1.
If you want to initialize a USB flash drive, connect
the USB flash drive to the USB Memory port.
2.
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
3.
Turn the [ ] knob to access "Format Media" screen,
and then press the [ ] knob.
The Format Media screen appears.
If you decide to cancel, press the [ ] button.
4.
Turn the [ ] knob to select the media (Internal
Memory or USB Memory) that you want to format.
5.
Press the [ ] knob to confirm.
A confirmation message appears.
If you decide to cancel, press the [ ] button.
6.
Turn the [ ] knob to select "Yes," and press the [ ]
knob to confirm.
The memory is formatted.
NOTE
Never disconnect the USB flash drive or turn off the power while
the screen indicates "Executing... "
7.
Press the [ ] button to exit function mode.
The [ ] button goes dark.

Restoring the Factory Settings (Factory Reset)

Here's how to restore all registrations and internally saved settings to
the factory-set condition. This function is called "Factory Reset. "
NOTE
Factory Reset erases all settings that you have stored, and returns
them to the factory-set condition.
MEMO
Executing this function does not erase the files in internal memory
or on a USB flash drive (sold separately). If you want to erase all files
from internal memory or from a USB flash drive, refer to ("Initializing
the Memory (Format Media)" (p. 23)).
1.
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2.
Turn the [ ] knob to access "Factory Reset" screen,
and then press the [ ] knob.
A confirmation message appears.
If you decide to cancel, press the [ ] button.
3.
Turn the [ ] knob to select "Yes," and press the [ ]
knob to confirm.
The memory is reset to its factory values.
NOTE
Never turn off the power while the screen indicates "Executing... "
4.
Turn the power off, then on again.
Convenient Functions
23