Exchanging Gague Parts And Optional; Changing The Thread Trimming Method - JUKI MEB-3200 Instruction Manual

12. EXCHANGING GAGUE PARTS AND OPTIONAL

(1) Changing the thread trimming method

■ DIP switch
Thread trimming type is selected with DIP switch 1 and 2 located at the rear of the machine head.
It is necessary to separately set the memory switch (machine model setting) in case of the change of
type such as S ←→ J and the like.
1) S and R type (long thread trimming)
Do not change DIP-SW for the long thread trimming type.
2) J and C type (short thread trimming)
DIP-SW
1
ON
OFF
ON
Simultaneously change DIP-SW when changing the presser set for J and C types.
When changing the presser set, the pattern used before the change cannot be used.
3) T type (short thread trimming without gimp) – for slacks
DIP-SW
1
OFF
Do not change DIP-SW for the short thread trimming without gimp type.
60
Presser type
2
OFF S
ON M
ON L
Type
2 3 Short thread trimming
without gimp
OFF ON
DIP-SW
1
OFF
Long thread trimming
Short thread Short thread
trimming S trimming M
(C standard) (J standard)
Type
2
Long thread
trimming
OFF
Short thread
trimming L