Installing The Batteries - Hunter ICD-HP Owner's Manual And Operating Instructions

Installing the Batteries
The ICD‐HP programmer operates with 4 x AA batteries. The batteries supplied are not
rechargeable!
To install batteries:
Remove cables and connectors from end of ICD‐HP.
Pry the yellow flexible yellow boot off the ICD‐HP.
Turn the ICD‐HP over, and remove the 2 screws securing the battery compartment cover
with a small screwdriver (either standard or Philips).
Insert 4 fresh AA batteries as shown, observing polarity.
Replace cover with screws and secure.
Replace yellow boot.
7