Using Do Not Disturb; Incoming Text Messages - Jeep Renegade 2018 User Manual

NOTE:
The volume setting for Uconnect is different
than the audio system.
NOTE:
To access help, push the VR button
steering wheel and say "help." Push the VR
button and say "cancel" to cancel the help
session.

Using Do Not Disturb

With Do Not Disturb, you can disable notifi-
cations from incoming calls and texts, allow-
ing you to keep your eyes on the road and
hands on the wheel. For your convenience,
there is a counter display to keep track of your
missed calls and text messages while you
were using Do Not Disturb.
To activate Do Not Disturb, select "Pairing"
on the phone menu bar, and select "Do Not
Disturb" from the Settings menu. You can
also activate it using the "Do Not Disturb"
button at the top of every Phone screen.
on the
Do Not Disturb can automatically reply with a
text message, a call or both, when declining
an incoming call and send it to voicemail.
Automatic reply messages can be:
• "I am driving right now, I will get back to
you shortly."
• Create a custom auto reply message up to
160 characters.
While in Do Not Disturb, Conference Call can
be selected so you can still place a second
call without being interrupted by incoming
calls.
NOTE:
• Only the beginning of your custom message
will be seen on the touchscreen.
• Reply with text message is not compatible
with iPhones.
• Auto reply with text message is only avail-
able on phones that supporting Bluetooth
MAP.

Incoming Text Messages

After pairing your Uconnect system with a
Bluetooth enabled mobile device with the
Message Access Profile (MAP), the Uconnect
system can announce a new incoming text
message and read it to you over the vehicle's
audio system.
To listen to incoming text messages, or any
messages currently on the mobile phone,
select the "Messages" menu and press the
"Listen" button next to the message you want
to listen to.
NOTE:
Only incoming text messages received during
the current ignition cycle can be viewed/read.
269