Table of Contents
Advertisement
Problem
• Unit will not start.
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
TROUBLESHOOTING
Possible Cause
• Plug tool into a working outlet.
• Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it
serviced at a D
authorized servicer.)
• Reset circuit breaker. (If the product
repeatedly causes thecircuit breaker to
trip,discontinue use immediately and have
it serviced at a D
authorized servicer.)
• Have cord or switch replaced at a
D
9
Possible Solution
WALT service center or
e
WALT service center or
e
WALT Center or authorized servicer.
e
Advertisement
Table of Contents
