2. Installation
The CVF4 consists of:
- Base plate with ventilator, heater and connector
- Replaceable filter plus cover
- Top cover
2.1 Included with the product
The following items are included with the CVF4 ventilation unit:
1
Ventilation Unit
2
8-wire cable with connector or 8 pins connector only for customer cable
(Optional)
3
Fixing kit with screws, washers and Allan key
4
Instruction sheet
5
Pack of 5 spare ventilation fan inlet filters
1
For optional accessories see chapter 3.
2.2 Tools required
If the CVF4 is mounted with the supplied screws only the supplied Allan key is required. Make sure there is space to fasten the
screw under the bottom of the plate. To fasten the radiometers other Allan keys or screwdrivers may be necessary.
2.3 Preparation
Like for any radiometer with 360 ° field of view, make sure there are no obstructions that are higher than ten times their distance
when selecting a location for the CVF4.
h
2
3
>10 x h
4
11
5