Serial Number Plate Location - Cushman BELLHOP 2 Owner's Manual And Service Manual

Table of Contents

Advertisement

OPERATION AND SERVICE INFORMATION
Read all of Manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
explosion, turn off all electrical loads from
the battery before removing battery wires.
'shorting out' a battery, which could result in
an explosion.
Reduce the possibility of accidental starting
by removing and grounding spark plug
wires and disconnecting battery at negative
terminal before servicing.
The electrolyte in a battery is an acid solu-
tion which can cause severe burns to the
skin and eyes. Treat all electrolyte spills to
the body and eyes with extended flushing
with clear water. Contact a physician imme-
diately.
Any electrolyte spills should be neutralized
with a solution of 2 teaspoons (10 ml) sodi-
um bicarbonate (baking soda) dissolved in 1
quart (1 liters) of water and flushed with
water.
Aerosol containers of battery terminal pro-
tectant must be used with extreme care.
Insulate metal container to reduce the pos-
sibility of can contacting battery terminals
which could result in an explosion.
It is in the best interest of both vehicle owner and service
technician, to carefully follow the procedures recom-
mended in this manual. Preventative maintenance,
applied at recommended intervals, is the best guarantee
for keeping the vehicle both dependable and economical.
This vehicle will give years of satisfactory service, provid-
ing it receives regular maintenance. Refer to the Periodic
Service Schedule for appropriate service intervals (Ref
Fig. 15 on page 13). Refer to Lubrication Points for
appropriate lubrication locations (Ref Fig. 32 on page
21).
To prolong vehicle life, some maintenance items must be
serviced more frequently on vehicles used under severe
driving conditions such as extreme temperatures,
extreme dust/debris conditions, frequent use with maxi-
mum load.
To access powertrain for routine maintenance, lift or
remove seat. For major repair, refer to appropriate Tech-
nician's Repair and Service Manual.
Page 12
Wrap wrenches with vinyl
tape to reduce the possi-
bility of a dropped wrench
Owner's Manual and Service Guide
Some service procedures may require the vehicle to be
lifted. Refer to LIFTING THE VEHICLE for proper lifting
procedure and safety information.

SERIAL NUMBER PLATE LOCATION

The serial number, manufacture date code label and sup-
plemental information labels are on the vehicle. One is
placed on the body below the front, driver side of the
seat. The serial number, manufacture date code label
and supplemental information labels located on the chas-
sis under the seat.
Design changes take place on an ongoing basis. In order
to obtain correct components for the vehicle, the manu-
facture date code, serial number and vehicle model must
be provided when ordering service parts. The serial num-
ber is permanently etched on the frame.
Serial Number
Labels
Ref Spl 3
Fig. 14 Serial Number Plate Location
Lift Flap on Access Panel
Label No.
V

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bellhop 6Bellhop 4

Table of Contents