Belkin Vision Wireless Router N1 User Manual page 43

Alternate Setup Method
1. User Name
This space is provided to type in your user name that was
assigned by your ISP.
2. Password
Type in your password and retype it into the "Retype Password"
box to confirm it.
3. Service Name
A service name is rarely required by an ISP. If you are not sure if
your ISP requires a service name, leave this blank.
4. MTU
The MTU setting should never be changed unless your ISP gives
you a specific MTU setting. Making changes to the MTU setting
can cause problems with your Internet connection including
disconnection from the Internet, slow Internet access, and
problems with Internet applications working properly.
5. Disconnect after X...
The "Disconnect" feature is used to automatically disconnect the
N1 Vision from your ISP when there is no activity for a specified
period of time. For instance, placing a check mark next to this
option and entering "5" into the minute field will cause the N1
Vision to disconnect from the Internet after five minutes of no
Internet activity. This option should be used if you pay for your
Internet service by the minute.
39 39
(1)
(2)
(3)
(4)
(5)
1
2
3
4
5
6
7
8
9
10