Belkin Vision Wireless Router N1 User Manual page 38

Alternate Setup Method
Step 4 Configuring your N1 Vision for Connection to your
Internet Service Provider (ISP)
The "Internet/WAN" tab is where you will set up your N1 Vision to
connect to your Internet Service Provider (ISP). The N1 Vision is
capable of connecting to virtually any ISP's system provided you have
correctly configured the N1 Vision's settings for your ISP's connection
type. Your ISP connection settings are provided to you by your ISP.
To configure the N1 Vision with the settings that your ISP gave you,
click "Connection Type"
the connection type you use. If your ISP gave you DNS settings,
(B)
clicking "DNS"
that require specific settings. Clicking "MAC Address"
clone your computer's MAC address or type in a specific WAN MAC
address, if required by your ISP. When you have finished making
settings, the "Internet Status" indicator will read "connection OK" if
your N1 Vision is set up properly.
(A)
(B)
(C)
(A)
on the left side of the screen. Select
allows you to enter DNS address entries for ISPs
34 34
(C)
will let you