Belkin Vision Wireless Router N1 User Manual page 27

Connecting and Configuring your N1 Vision
Push Button Security – Select this
option if you would like to set up your
computers or devices using the Wi-Fi
Protected Setup
TM
Using WPS is not a requirement to
connect to the N1 Vision.
To make a WPS connection, select
the "New Connection" option. To do
so, you must have WPS enabled on
the computer or device connecting to
the N1 Vision. You will need to push
the WPS button in your computer or
device within two minutes.
B. Help and Tips
Select this option for additional
information.
C. Power Save
Select this option to conserve the
display's power or if you prefer
to turn off graphics. When power
save is ON, the display will turn
off within two minutes after any
user interaction.
23 23
(WPS) standard.
1
2
3
4
5
6
7
8
9
10