Advertisement
STEP 2B: MOUNTING LOCATION—2017 PACIFICA
1. Remove the brackets and screws from the CD player. Mount the CD player inside the (provided) aluminum case.
Use the screws you removed earlier to secure the case on the CD player in the front 4 holes. The remaining 2
screws will be used to secure case assembly in vehicle. Install the included threaded stand-offs in the rear-most
holes of the player through the case enclosure.
2. Remove the screw located in the media hub bezel opening (marked "3" in the picture below).
3. Open the bin (marked "2" in the picture below) and use a trim stick to remove the media hub bezel.
4. Remove the six screws (marked as "2" in the picture below) and drop the bin (marked as "1" in the picture
below) down to remove.
5000-8750 Instructions 02-22-17.docx
INSTALLATION INSTRUCTIONS
Page 5 of 9
GS
Advertisement
