Page 1
585E-QG1612-00 QUICK OPERATION GUIDE CRAWLER CRANE CC1485S Serial No. 7048 and up ・This operation guide explains basic operation of the machine. Before starting work, always conduct checks written in “OPERATION 3.1 PRE-OPERATION INSPECTION” in the separate “OPERATION MANUAL”. For safety cautions and detailed operation of the machine not explained in this book, please read and understand the separate “OPERATION MANUAL”...
CONTENTS ITEM Page 1. STARTING ENGINE & STOPPING ENGINE 1.1 STARTING ENGINE 1.2 STOPPING ENGINE 2. OPERATION LEVERS 3. SWITCHES 4. MACHINE MONITOR 4.1 MONITOR DISPLAY 4.2 MONITOR DISPLAY OF MOMENT LIMITER 5. WORKING RADIUS / LIFTING HEIGHT 6. RATED TOTAL LOAD CHART FOR SAFE USE OF THE MACHINE This manual classifies the risks into the following three categories for easy understanding of the safety information.
1. STARTING ENGINE & STOPPING ENGINE 1.1 STARTING ENGINE • Start the engine only when the operator is sitting on the operator's seat. • Do not start the engine by short-circuiting the starter circuit. Doing so may cause serious physical injury or fire. •...
Page 5
2. Insert the key into the starter switch (3) and turn the key to the "START" position. The engine starts. 3. When the engine has started, release your hand from the key. The key automatically returns to the "ON" position. 4.
1.2 STOPPING ENGINE CAUTION • Stopping the engine before it sufficiently cools down may shorten the life of engine units. Do not stop the engine suddenly except for an emergency. • When the engine is overheated, do not stop the engine suddenly.
2. OPERATION LEVERS (1) Lock lever (4) Right work equipment operation lever (2) Travel lever (with auto deceleration mechanism) (with auto deceleration mechanism) (3) Left work equipment operation lever (5) Accelerator pedal (with auto deceleration mechanism) [1] LOCK LEVER • When standing up from the driver seat, place the lock lever securely in the lock position (L). If the lock lever is in the free position (F) and contacts the operation levers and operation pedals carelessly, serious physical injury may be caused.
Page 8
[2] TRAVEL LEVER • When the sprocket (A) side is in the rear, the track frame faces forward. When the track frame faces rearward, the direction of travel lever operation is opposite to the direction of machine movement (forward and rearward movement, right and left movement direction).
Page 9
[5] ACCELERATOR PEDAL Use the accelerator pedal only when the machine stops and you operate the crane. Never use this pedal during travel operation. An operation mistake may be made, resulting in serious physical injury. Use the fuel adjustment dial to adjust engine speed during travel operation. Use this lever to adjust the engine speed or output during crane operation.
Page 15
QUICK OPERATION GUIDE for MAEDA CRAWLER CRANE CC1485S-1 Document Number 585E-QG1612-00 First edition December 9, 2016 Issued by MAEDA SEISAKUSHO CO., LTD. 1095, Onbegawa, Shinonoi, Nagano City, Nagano Prefecture, 388-8522 Japan Any reproduction or reprinting without permission is prohibited.