Time Of Day Clock; Basic Instructions - Jenn-Air M167 Series Use And Care Manual

Time of Day Clock
• After plugging in the oven or after a power outage, the Display will flash
4 zeros. Set clock using the instructions below.
• Time of Day clock is a 12 hour clock.
• If set, the time of day will always be displayed when no other cooking
function is being used.
• To check the time of day when programming your oven or cooking, push
the Clock Pad. Time of day will be displayed for 3 seconds. Display will
then return to cooking countdown.
BASIC INSTRUCTIONS
1. PushClock Padtwice. Indicatorwords"ENTERCLOCKTIME"
willappear in the display.
2. Set the time of clayby pushingthe appropriatenumbers.
3. Push Start/Stop Pad. The Time of Day clock will not be
activateduntilthe Start/Stop Pad is pushed. Time willchange
in one minuteincrements.
Timer
The Timer feature of this oven has many uses. Use it to time a long distance
phone call, standing times after microwave cooking, or mixing or beating times
when preparing recipes. The Timer can be programmed up to 99 minutes and
99 seconds.
BASIC INSTRUCTIONS
1. PushtheTimerPad. Indicatorwords"enterTimerTime"willappear
in thedisplay
2. Enterdesiredtime. If time is notenteredwithin3 seconds,
the displaywillreturnto time of day.
3. Push Start/Stop Pad.
• A longbeepsignalsthe end of a timing operation.
• To stoptimer once ithas started,pushTimer Pad and Reset Pad. Timer
willreturn to time of day orcookingcountdown.
• The timer can be set whilecooking. The time in the display is forwhat is
cookingin the oven. To find out how muchtime is left on the timer,push
Timer Pad. Thetimerwillflash onthe displayfor 3 secondsbeforereturning
to the cookingcountdown.
11