Chapter 6 Network Settings; Dial; Wi-Fi Settings; Set Wi-Fi Parameters - HIKVISION DS-MH2111 Series User Manual

Chapter 6 Network Settings

6.1 Dial

Before you start:
Install a SIM card first. For details, refer to 3.1 Install SIM Card.
Step 1 Go to Network Settings > Dial.
Step 2 Select On.
Step 3 Save the settings.
Step 4 Click OK on popup message box to reboot device to activate the settings.
Step 5 Optionally, after reboot, go to Network Settings > Dial Information to view the
network type, SIM card, IMEI, etc.

6.2 Wi-Fi Settings

Purpose:
You can access internet by connecting to a Wi-Fi. Set Wi-Fi to connect in body
camera assistant.

6.2.1 Set Wi-Fi Parameters

Purpose:
Wi-Fi parameters can only be configured in body camera assistant.
Step 1 In body camera assistant, go to Device Configuration > Network Settings
Step 2 Check the checkbox of Enable.
Step 3 Enter SSID and Key of Wi-Fi signal to connect in text fields.
Step 4 Click Save.
Body Camera User Manual
Figure 6-1 Dial
21