Advertisement
Thank you for purchasing Pro'sKit product. The SS-956 Smart Rework Station with Vacuum Pickup has
been designed to meet high quality standards. Please properly use and take care of your product for
prolonging service life. Please store the manual in a safe, easily accessible place for future reference.
Safety Instructions
WARNING
Warnings and cautions are placed at critical points in this manual to direct the operator's
attention to significant items. They are defined as follows:
WARNING: Failure to comply with a WARNING may result in serious injury or death.
CAUTION: Failure to comply with a CAUTION may result in injury to the operator, or damage to the
items involved. Two examples are given below.
NOTE: A NOTE indicates a procedure or point that is important to the process being described.
EXAMPLE: AN EXAMPLE is given to demonstrate a particular procedure, point or process.
Be sure to comply with following WARNINGS and CAUTIONS for your safety.
WARNING
When the power is ON, the temperature of the hot air and the nozzle ranges will be increased
from indoor temperature to 480°C ( 896°F).
To avoid injury to personnel or damage to items in the work area, observe the following:
Do not direct the hot air toward personnel or touch the metal parts near the nozzle.
Do not use the product near combustible gases or flammable materials.
Advise those in the work area that the unit can reach very high temperatures and should be
considered potentially dangerous.
Turn the power OFF when no longer using the Pro'sKit SS-956 or when leaving it unattended.
Before replacing parts or storing the unit, allow the unit to cool and then turn the power OFF.
To prevent accidents and failures, be sure to take the following precautions:
Do not strike the hand piece against hard surfaces or otherwise subject it to physical shock.
Be sure the unit is grounded. Always connect power to a grounded receptacle.
Do not disassemble the pump.
Do not modify the unit.
Use only genuine Pro'sKit replacement parts.
Do not wet the unit or use the unit with wet hands.
Remove power cord by holding the plug – not the wires.
Make sure the work area is well ventilated.
The Pro'sKit SS-956 is not intended for use by children or infirm persons without supervision.
Children should be supervised to ensure that they do not play with the SS-956.
1
Advertisement
