Acer AM100 User Manual page 4

A tour of the device
Item
1 Function button &
Light sensor
2 Wall-mounting hole
3 Battery LED indicator
4 Power switch
5 Micro-USB
connector
6 Wi-Fi indicator
7 Breathing LED light
8 Front panel
Function button :
 Short press - Detect air quality immediately
 Long press (5 secs), after the beep, immediately let go of the button - Reset Wi-Fi
for reconfiguration. The saved Wi-Fi AP and password setting will be cleared
Light sensor :
The button is also the light sensor for detecting your environmental brightness. While
the Sleep mode is enabled (setup in App), The air quality ambient light will switch
on/off automatically according to the environmental brightness.
Used for hanging the device on a hook
Shows the battery status:
Green - Battery is fully-charged

Red - Battery is charging

 Off - power adapter not connected
Turns the power on and off
Connects to the power adapter
Shows the wireless connection status:
Green - Local Wi-Fi network and Acer Cloud connected

Red - Wi-Fi is configured. However, device is disconnected from the Wi-Fi

network, and/or has a limited connection to the local Wi-Fi network (device
cannot access internet or cannot connect to the Acer Cloud)
Off - Wi-Fi is not configured.

Lights up using different colors to show the current air quality.
Detach to reveal the particulate matter sensor for maintenance
Description
4
- -