Table of Contents
Advertisement
-
With the MX20 in Installer mode, select the FUNC pages and verify that all functions are
enabled except for lightning.
-
Go to the DATA pages and configure the MX20 as follows:
UAT Traffic Data Link Source
-
Wait at least 30 seconds (until red message no longer appears at the bottom of the screen) and
then recycle power to the MX20. Wait another 30 seconds and verify that the TRAF warning
does not appear.
GDL 90 Installation Manual
Post-Installation Configuration & Checkout
Port 4
560-1049-00 Rev B
4-9
Advertisement
Table of Contents
