Safety Warnings - Powerware 9125 User Manual

C H A P T E R 2
S W
AFETY ARNINGS
Read the following precautions before you install the UPS.
SAVE THESE INSTRUCTIONS. This manual contains important instructions that you
should follow during installation and maintenance of the UPS and batteries. Please
read all instructions before operating the equipment and save this manual for future
reference.
This UPS contains LETHAL VOLTAGES. All repairs and service should be performed
by AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER
SERVICEABLE PARTS inside the UPS.
:
This UPS contains its own energy source (batteries). The output receptacles may
carry live voltage even when the UPS is not connected to an AC supply.
:
Do not remove or unplug the input cord when the UPS is turned on. This removes
the safety ground from the UPS and the equipment connected to the UPS.
:
To reduce the risk of fire or electric shock, install this UPS in a temperature and
humidity controlled, indoor environment, free of conductive contaminants. Ambient
temperature must not exceed 40•C (104•F). Do not operate near water or
excessive humidity (95% max).
:
To comply with international standards and wiring regulations, the total equipment
connected to the output of this UPS must not have an earth leakage current
greater than 1.5 milliamperes.
:
For UPS models with hardwired outputs, overcurrent protection for the output AC
circuit(s) is to be provided by others.
:
For UPS models with hardwired outputs, suitably rated disconnect switches for the
output AC circuit(s) are to be provided by others.
Powerware 9125 User's Guide (2500–3000 VA)
®
I M P O R T A N T S A F E T Y I N S T R U C T I O N S
D A N G E R
W A R N I N G
:
Rev B www.powerware.com
3