Table of Contents
Advertisement
FABRIK C LIVE
EQ section
The Fabrik C Live EQ section is a 4-band parametric EQ with four selectable filter types: Notch, Parametric, Shelving and
Cut. If you're looking for a razor sharp filter, use the Notch filter that has a lower limit as low as 0.01 octaves. For a more
gentle approach the shelving filter with a variable slope is a better choice. Cut filters can be switched between a 12dB/oct
maximum flat amplitude (Butterworth) and a flat group delay type (Bessel). Mark the handle (1, 2, 3 or 4) for the band to
adjust. Set the BW/Type, then grab the handle again and move for frequency/gain adjustments.
Bands On/Off
Click to activate/deactivate the four individual bands.
Adjusting Frequency and gain
Simply grab the symbol for one of the active bands (1, 2, 3 or 4) using the left mouse button and move until desired
settings are achieved.
Adjusting BW/TYPE
First select a band. Then place the cursor within the BW/Type field, press left mouse button and move mouse up/down to
change type and bandwidth. Different filter types are available for the Low, Mid and High filters. Please refer to the
following pages for overview of the EQ types.
Bypass
Press to bypass the EQ section.
34
Bands On/Off
Grab handle
to select
Hide quick links:
Advertisement
Table of Contents
