Section 2 - Installation
To use the DIR-604 in AP Mode, follow the steps
below:
1. Ensure you have a broadband Internet connector,
such as a cable or DSL client line that connects
the Internet to your home or office.
2. Connect the cable properly or install the modem.
3. Connect the cable or modem with the broadband
router.
4. Connect the DIR-604's Ethernet port to your
LAN.
5. Move the switch to wireless AP Mode.
6. Connect your PC or notebook to the DIR-604
using the PC or notebook's wireless adapter.
D-Link DIR-604 User Manual
Connection - AP Mode
8