D-Link DIR-604 User Manual page 32

Section 3 - Configuration
This page displays the current information for the DIR-604. It will display the LAN and Wireless information, in addition
to the firmware version and date the firmware was last updated.
If your Internet connection is set up for a Dynamic IP
address then a DHCP Release button and a DHCP
Renew button will be displayed. Use DHCP Release
to disconnect from your ISP and use DHCP Renew
to connect to your ISP.
If your Internet connection is set up for PPPoE,
PPTP, or L2TP, a Connect button and a Disconnect
button will be displayed. Use Disconnect to drop the
Internet connection and use Connect to establish
the Internet connection.See the following for more
information.
LAN:
Displays the MAC address and the private
(local) IP settings for the Router.
Wireless
Displays the wireless mode, MAC address and
802.11n:
your wireless settings such as SSID, Channel,
and Encryption status.
D-Link DIR-604 User Manual
Device Information
28