D-Link DIR-604 User Manual page 27

Section 3 - Configuration
Use this option to save the current router
Save Settings
configuration settings to a file on the hard disk
to Local Hard
of the computer you are using. First, click the
Drive:
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Use this option to load previously saved
Load Settings
from Local router configuration settings. First, use the
Hard Drive: Browse control to find a previously save file of
configuration settings. Then, click the Upload
Settings button to transfer those settings to
the Router.
Restore to Click the Restore Device button to restore
Factory all configuration settings back to the settings
Default that were in effect at the time the Router was
Settings: shipped from the factory. Any settings that have
not been saved will be lost, including any rules
that you have created. If you want to save the
current router configuration settings, use the
Save button above.
Clear Click the Clear button to restore the device back
Language to the English interface version and remove
Pack: other languages installed for the system web
pages.
D-Link DIR-604 User Manual
Save and Restore Settings
23