Manually Configuring Network Settings In Windows 2000, Nt, Or Xp - Belkin F5D8233-4 User Manual

Manually Configuring Network Settings Manually Configuring Network Settings

Manually Configuring Network Settings in Windows 2000, NT, or XP

1.
Click "Start", "Settings", then "Control Panel".
2.
Double-click on the "Network and dial-up connections" icon
(Windows 2000) or the "Network" icon (Windows XP).
3.
Right-click on the "Local Area Connection" associated with
your network adapter and select "Properties" from the
drop-down menu.
4.
In the "Local Area Connection Properties" window, click "Internet
Protocol (TCP/IP)" and click the "Properties" button. The
following screen will appear:
(1)
(2)
(3)
5.
If "Use the following IP address"
will need to be set up for a static IP connection type. Write the
address information the table below. You will need to enter this
information into the Router.
6.
If not already selected, select "Obtain an IP address
automatically"
(3)
. Click "OK".
Your network settings are now configured for use with the Router.
(1)
and "Obtain DNS server address automatically"
77
(2)
is selected, your Router