PEUGEOT 206 Manual page 9

10
Rear seats
– Lift the front of the seat cushion 1,
– Tilt the seat cushion 1 against the front
seats,
– Position the seat belt under the belt
holder 2,
– Pull control 3 to unlock the seat back 4,
– Remove or lower the head restraint,
– Tilt the seat back 4.
When refitting, take care not to trap the
seat belts.
26-05-2003
YOUR 206 AT A GLANCE
Load space cover
To install:
– position (1) one end of the cover roller in one of the two supports,
– compress (2) the opposite end of the roller and position it,
– release it (3) so that it engages,
– unroll (4) the cover to the boot pillars,
– insert the cover guides in the rails on the pillars.
To remove:
– remove the cover guides from the rails on the pillars,
– return the cover to its roller, compress it and remove it
from its support.
78
107