PEUGEOT 206 Manual page 79

FRONT SEATS
1. Forwards-backwards
adjustment
Lift the control and slide the seat
forwards or backwards.
2. Access to rear seats
(3 door)
Pull one of the two handles to fold
the seat back and move the seat
forwards. On repositioning, the
seat returns to its initial position
It is impossible to access the rear
seats if the front seat is in the
reclining position.
3. Seat back angle adjustment
Push one of the two handles
towards the rear.
4. Seat height adjustment
Pull the handle upwards.
Remove your weight from the
seat to raise, or press on the seat
to lower.
26-05-2003
YOUR 206 IN DETAIL
5. Head restraint height and angle
adjustment (saloon and 206 SW)
To raise the restraint, push it
upwards.
The adjustment is correct
when the upper edge of the
head restraint is level with
the top of the head.
The head restraint has a frame
with notches, which prevent the
head restraint dropping down
(this is a safety device in the
event of an impact).
To lower the head restraint, it is
necessary to push simultane-
ously:
– the button located at the base
of the head restraint frame,
– the head restraint downwards.
To remove the head restraint,
press the lug.
Never drive
head restraints removed;
they should be in place
and correctly adjusted.
Rear head restraints
These have one position for when
they are being used (high) and a
storage position (low). They can
be removed.
To lower the head restraints,
press the lug.
To remove them, pull upwards as
far as the stop then press the
release control.
with the
75