Belkin F5D8230-4 User Manual page 17

Knowing your Router
8. Connection to Modem (Internet/WAN Port) – GREEN
This port is for connection to your cable or DSL modem. Use the
cable that was provided with the modem to connect the modem
to this port. Use of a cable other than the cable supplied with the
cable modem may not work properly.
9. Reset Button (Located on bottom of Router)
The "Reset" button is used in rare cases when the Router may
function improperly. Resetting the Router will restore the Router's
normal operation while maintaining the programmed settings. You
can also restore the factory default settings by using the "Reset"
button. Use the restore option in instances where you may have
forgotten your custom password.
Restoring the Factory Defaults
Press and hold the "Reset" button for at least 10 seconds then
release it. The lights on the Router will momentarily flash. When
the lights stop blinking, the reset is complete.
10. Resetting the Router
Push and release the "Reset" button. The lights on the Router
will momentarily flash. When the lights stop blinking, the reset
is complete.
15
1
2
3
4
5
6
7
8
9
10
11