Table of Contents
Advertisement
dCS Rossini Upsampling Network DAC User Manual
Software Issue 2.0x
December 2018
Rotary Control
The Rotary Control (H) usually controls the
Volume
setting. The
Volume
setting changes in 0.5dB
steps between 0dB (full volume) and -50dB, in 1dB steps down to -80dB and then mutes below -80dB.
When the volume is changed, the volume setting is displayed in large text for a few seconds.
When the
Balance
menu page is open or the remote
Balance
button has been pressed, the rotary
control adjusts the channel
Balance
instead. The Balance adjustment is in 0.1dB steps down to
∞
-6.0dB on each channel, then mute (-
) below that. The
Volume
taper on the display changes to
show the
Balance
setting.
Balance left
Balance central
Balance right
While the menu is open, the Rotary Control pages forward and backwards through the menu instead
of changing the volume.
Page 33
Rossini DAC Manual v2_0x
English version
Advertisement
Table of Contents
