Specifications; Ec Declaration Of Conformity - Makita FS2200 Instruction Manual

ENGLISH (Original instructions)
1-1. Lock ring
2-1. Locking sleeve
3-1. Locator
4-1. Locator
5-1. Switch trigger
5-2. Lock button
6-1. Lamp
7-1. Reversing switch lever

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted
according to EN60745:
Model FS2300,FS2300X
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Model FS2300,FS2300X
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
8-1. Hook
9-1. Lock ring
9-2. Gear housing
10-1. Locator
10-2. Bit
10-3. Gear housing
11-1. Locator
11-2. Locking sleeve
Model
Self drilling screw
Drywall screw
-1
)
Overall length
Net weight
Safety class
noise level determined
) : 83 dB (A)
pA
) : 94 dB (A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
FS2200
6 mm
5 mm
0 - 2,500
287 mm
1.6 kg
ENE033-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENF002-2
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
ENG905-1
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

We Makita
ENG900-1
manufacturer declare that the following Makita
sum)
machine(s):
Designation of Machine:
Drywall Screwdriver
Model No./ Type: FS2300, FS2300X
are of series production and
Conforms to the following European Directives:
2006/42/EC
4
12-1. Locator
12-2. Bit
12-3. Magnetic bit holder
13-1. Swells
13-2. Trapezoidal holes
13-3. Locator holder
FS2300
6 mm
5 mm
0 - 2,500
290 mm
1.6 kg
/II
Corporation as the
FS2300X
6 mm
5 mm
0 - 2,500
305 mm
1.6 kg
ENG901-1
ENH101-16
responsible