Table of Contents
Advertisement
1.800.561.8187
CAUTION (continued)
Never disassemble, modify or repair the product.
Failure to observe the above may cause damage to the instrument or the probe. It may
also void the manufacturer's warranty and calibration certificate.
Do not pick up or carry the instrument by the cable.
It may cause a malfunction or damage to the wiring of the cable.
Remove the batteries from the instrument when storing for long
periods of time. When inserting the batteries, be sure to insert them with the
polarity facing the correct direction.
Failure to do so may cause battery leakage and subsequent damage to the
instrument. The manufacturer does not recommend any specific brand of
batteries but a high-quality name brand alkaline battery seems to last the longest.
Do not wipe the instrument with a volatile solvent.
Use neutral solvents and simple cleaners to clean the instrument with a soft cloth.
Regularly check the head of the probe for contamination.
Impurities (such as dust) on the blades and/or thermal sensor may affect the
accuracy of the instrument.
NOTE: If the vane assembly head or probe head requires cleaning we
recommend a fine mist of isopropyl alcohol and a fine long-haired brush or send
the unit in or servicing.
When storing or shipping the instrument, the manufacturer recommends
disconnecting the cable(s) and returning it to the original carrying case.
www.
TM
.com
information@itm.com
Advertisement
Table of Contents
