Table of Contents
Advertisement
My parent unit does not recognise the memory
card.
• Make sure that you have inserted a certified memory
card.
• Make sure that you have inserted the memory card
correctly. See page 8 on how to insert a memory card.
My parent unit shows a low-battery warning.
• The parent unit is low on power and needs to be
charged before you can use it. See page 7 on how to
charge your parent unit.
The display on my parent unit freezes or does not
respond.
• Turn the parent unit off and turn it on again.
is not scrolling when my parent unit is placed
on the base.
• Incomplete battery contact - adjust the parent unit on
the docking station.
• Dirty contact - clean the battery contact by wiping with
an alcohol moistened cloth.
• Battery is full - charging is not necessary at this time.
There is no sound when the headset is connected
to my parent unit.
• Unplug and reconnect the headset. Make sure that
the connector is pushed in all the way.
• The volume may be deactivated or set too low.
•
Make sure your headset has a compatible 3.5mm
3-pole connector.
39
Noise interference on your radio or television.
• Your base may be too close. Move it as far away as
possible.
Help
Advertisement
Table of Contents
