Binatone BLINK Buddy User Manual page 12

4. Align the back cover tabs with the notches located at
the edges of the exposed back panel.
5. Slide up the back cover until it clicks into place.
6. Place the parent unit on the docking station to charge
for at least 6 hours. When the parent unit is fully
charged, is displayed.
Note
If the Red Charging LED did not light up, you need to re-
align the parent unit to get a good charging contact with
the docking station.
IMPORTANT
Use only the rechargeable battery pack supplied with the
product.
Battery Low Warning
If the following appears on the display, you will need to
charge the parent unit.
7
Battery Performance
Note that a new battery will not reach full capacity until it
has been discharged and charged in normal use for
several days.
To keep your battery in the best condition, leave the
parent unit off the docking station for a few hours at a
time.
Draining the battery completely each month before
charging will help to prolong battery life.
The charge capacity of a rechargeable battery will reduce
with time as it wears out, giving the parent unit a reduced
talk/standby time. Eventually it will need to be replaced.
After charging your parent unit for the first time,
subsequent charging time will be about 6 hours a day.
The battery and parent unit may become warm during
charging. This is normal.
Setting Up