Subscribe to Our Youtube Channel
Related Manuals for Binatone MBP28 Multi-Cam
Summary of Contents for Binatone MBP28 Multi-Cam
- Page 1 User’s Guide MBP28, MBP28/2, MBP28/3, MBP28/4 MBP28 Twin, MBP28 Triple, MBP28 Quad Baby Monitor The features described in this user's guide are subject to modifications without prior notice.
- Page 2 Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP28. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status.
- Page 3 Overview of your Parent unit 3 Menu / OK In idle mode: Press to access the main menu. In menu mode: Press to access a sub-menu, or confirm the settings. 4 DOWN / Volume - In idle mode: Press to decrease the speaker volume. In menu mode: Press to move down the menu list.
- Page 4 Parent Unit Display Indicates the timer alarm is activated. Icons Function Indicates the sound alert is set to on. Indicates the signal strength between the camera unit and parent unit. The more blocks, the Indicates when the parent unit is connected with the stronger the connection signal.
- Page 5 Menu Structure of the Parent Unit MAIN MENU BU SELECTION LANGUAGE TIMER BRIGHTNESS SOUND ALERT REGISTER RESET ALERT TONES SUB MENU Baby Unit 1 Activation Level 1 ~ 5 Low Battery Baby Unit 2 Set Timer No Link Baby Unit 3 Baby Unit 4 All Baby Units Note: Only Baby...
- Page 6 Overview of your Camera unit 1 Infrared Lights 4 x infra-red LEDs for night vision illumination. 2 Camera Lens 3 Power/Link Indicator On steadily when the camera unit is switched on and linked to the parent unit. Flashes quickly when the camera unit is in registration mode.
- Page 7 Important guidelines for installing your Baby Monitor • To use your camera unit and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. • Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or reinforced concrete, between the camera and parent unit may block the radio signal.
-
Page 8: Table Of Contents
1. SAFETY INSTRUCTIONS........9 4.7 Register a camera unit ........17 4.8 Reset .............. 17 2. GETTING STARTED ........10 5. DISPOSAL OF THE DEVICE 2.1 Camera unit power supply......10 (ENVIRONMENT)..........18 2.2 Parent unit battery installation ......11 2.3 Belt clip/stand on parent unit ...... -
Page 9: Safety Instructions
1. SAFETY INSTRUCTIONS • Make sure the camera unit and the cord are always out of reach of the baby. • Adult assembly is required. Keep small parts away WARNING: from children when assembling. • This product is not a toy. Children should be STRANGULATION HAZARD - Keep the adapter cord supervised to ensure that they do not play with the out of the baby's reach. -
Page 10: Getting Started
2. GETTING STARTED • To avoid the risk of electric shock, do not open the housing of the camera or parent units, other than the Camera unit power supply battery compartment. • This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. -
Page 11: Parent Unit Battery Installation
Parent unit battery installation 1. Take off the belt clip/stand. A rechargeable battery pack is supplied and should be 2. Slide off the battery compartment cover. fitted, so that the parent unit can be moved without losing 3. Insert the plug of the battery pack into the socket the link and picture from the camera unit(s). -
Page 12: Belt Clip/Stand On Parent Unit
3. USING YOUR BABY MONITOR Belt clip/stand on parent unit Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible, correct parental supervision. Power on/off the parent unit 1. -
Page 13: Adjust Speaker Volume Of Parent Unit And Camera Unit
Talk Back NOTE If you place the parent and camera units too close You can use the Talk Back feature to comfort and together, you may hear a high pitched noise. This is not a reassure your baby. fault. The units are designed to be operated at some During Talk Back, you will not be able to hear your baby distance apart, e.g. -
Page 14: Lullaby
Switch monitoring camera unit Note The current temperature at the camera unit is shown on The system allows registering up to four camera units. the parent unit status bar whenever it is displayed. You can switch the monitoring camera unit by one-touch key or by menu settings. -
Page 15: Parent Unit Settings
4. PARENT UNIT SETTINGS 4.2.2 Set the timer 1. Repeat steps 1 to 2 in section 4.2.1. Set the language 2. Press to select TIMER. 1. Press to access the main menu. 3. Press and then set the number of hours (00 to 12) 2. -
Page 16: Sound Alert
Sound alert NOTE When LCD is off, any alert message will turn on the LCD. When the sound alert is set ON, and the parent unit speaker volume is off, it will cause the parent unit to beep Select camera unit and flash "Sound alert from Baby Unit x"... -
Page 17: Register A Camera Unit
Register a camera unit Reset You can restore all the adjustable settings of the IMPORTANT registered camera units and parent unit to the original When you purchase your baby monitor system, all factory settings. cameras are already registered to the parent unit, so you do not need to register them. -
Page 18: Disposal Of The Device (Environment)
5. DISPOSAL OF THE DEVICE 6. CLEANING (ENVIRONMENT) Clean your MBP28 with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive At the end of the product lifecycle, you solvents. should not dispose of this product with normal household waste. -
Page 19: Troubleshooting
7. TROUBLESHOOTING • Battery pack in parent unit is running low. Connect the parent unit to the mains power with the supplied power Power Indicator on the parent unit does not come on adaptor for recharging. • Check whether the parent unit is powered on. •... -
Page 20: General Information
Talk back feature does not work What Does this Warranty Cover? • Make sure the camera unit is powered on, and link Subject to the exclusions contained below, BINATONE between parent unit and camera unit is normal. warrants that this Motorola branded product ("Product") or •... - Page 21 What will BINATONE do? FINANCIAL LOSS ARISING OUT OF OR IN BINATONE or its authorised distributor at its option and CONNECTION WITH THE ABILITY OR INABILITY TO within a commercially reasonable time, will at no charge USE THE PRODUCTS OR ACCESSORIES TO THE...
- Page 22 MOTOROLA, BINATONE or its authorised service centres, are Batteries. Only batteries whose fully charged capacity excluded from coverage. falls below 80% of their rated capacity and batteries that leak are covered by this Warranty.
- Page 23 You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorised Repair Centre. To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product;...
-
Page 24: Technical Specifications
9. TECHNICAL SPECIFICATIONS Parent Unit : Camera Unit: Frequency 1881.792 - 1897.344 MHz Frequency 1881.792 - 1897.344 MHz Channels Channels Operating temperature 5ºC - 45ºC Operating temperature 5ºC - 45ºC Display 1.8" TFT LCD Image sensor Color CMOS 0.3M Pixels Display colour 65K colour LCD Lens... -
Page 25: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY EC DECLARATION OF CONFORMITY... - Page 26 Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the MBP28 Multi-Cam and is the answer not in the manual?
Questions and answers